Dear all, share info bitvise terbaru
bisa di download di official site nya:
[Info] Bitvise 6.45 NEW!!!
Dear all, share info bitvise terbaru
12-07-2015, 11:03 AM
kelebihannya apa gan Bitvise 6.45..??
Dicka, proud to be a member of ForNesia Family since Oct 2015.
12-07-2015, 11:08 AM
Changes in Bitvise SSH Client 6.45: [ 23 November 2015 ]
changelog dari versi yang lebih jadul lagi
Changes in Bitvise SSH Client 6.44: [ 10 November 2015 ]
Proxy settings: Fixed a bug which prevented per-profile proxy settings from functioning reliably.
stnlc: When in an interactive prompt, failure to add a client-to-server or server-to-client port forwarding rule would incorrectly disconnect the session "on user's request". Fixed.
Changes in Bitvise SSH Client 6.43: [ 30 October 2015 ]
Improved uninstallation to reduce the likelihood that Windows might need to be restarted to complete a reinstallation or upgrade. If a restart would be required, the user can now choose to abort reinstallation.
In the graphical SFTP interface, file icons are now loaded asynchronously, to avoid the interface blocking due to lengthy antivirus scans.
Fixed an issue that prevented X11 forwarding from working properly in terminal windows other than the first one. This issue was introduced with 6.xx versions.
The RIS and DECST instructions to reset terminal and screen buffer are now supported in conjunction with xterm. This allows the Linux reset command to be used to fully reset the terminal.
A copy and paste notification is now displayed also when Shift+Insert is used to paste.
Fixed an issue which caused the SSH Client main window to freeze if an FTP client was not disconnecting the control connection.
Added IPv6 support to the FTP Bridge, implementing support for EPSV and EPRT commands.
The GSSAPI DH key exchange method with group exchange is now also de-prioritized when connecting to non-Bitvise servers, along with other methods that use group exchange. (Non-Bitvise servers tend to generate DH parameters that are incompatible with the FIPS cryptographic provider used by FlowSsh; this results in key exchange failures.)
Changes in Bitvise SSH Client 6.41: [ 30 August 2015 ]
Installation and upgrade:
This is the first version tested on Windows 10 as part of the development process.
The SSH Client installer now supports the -activationCode parameter. This allows a license code to be applied to the SSH Client during initial installation or an upgrade. The SSH Client will operate with full functionality with or without a license code, but applying it allows users to indicate their licensed status.
On Windows Vista and newer, the installer did not auto-run correctly after the uninstaller prompted for restart during upgrade. Fixed.
Failed and incomplete installations are now detected and displayed, to help the user choose the correct installation directory.
Publisher and version information is now added for display in Add/Remove Programs.
Bitvise SSH Client now includes FlowSshNet: our SSH library for use with .NET; and comes with .ps1 scripts demonstrating how to use FlowSshNet from PowerShell. The FlowSsh library can now be used under the Bitvise SSH Client license if Bitvise SSH Client is installed on the same computer.
SHA-256 public key fingerprints, compatible with the latest OpenSSH versions, are now supported.
The 1024-bit fixed prime Diffie Hellman key exchange method, diffie-hellman-group1-sha1, is now disabled by default, due to doubts about continuing security of Diffie Hellman with a 1024-bit fixed prime. Compatibility with most older servers should be retained via the diffie-hellman-group14-sha1 method, which uses a 2048-bit fixed prime. We recommend migrating older SSH clients and servers to new versions supporting ECDH and ECDSA.
Symmetric encryption algorithms that use CBC mode are now disabled by default. Bitvise SSH Client and Server implement defenses against attacks on CBC mode, but other implementations that still use CBC mode are unlikely to implement such defenses. Most implementations should now support encryption in CTR mode.
In past Bitvise SSH Client 6.xx versions, gssapi-keyex authentication was always unavailable. Fixed.
The graphical SFTP client now maintains a list of recent locations.
Fixed an issue which prevented use of the -proxyUserName parameter with the graphical SSH Client. Command-line clients were unaffected.
Fixed an issue which caused the graphical SSH Client to send an empty response to all prompts other than the first one in keyboard-interactive authentication. This issue did not affect command-line clients.
A new retry utility is now included, which can be used to automatically retry a command based on its exit code. Run retry without parameters for help. The utility can be used with any command line program, but is intended specifically for use with sftpc.
The log utility now supports an additional parameter, -t, which will cause the utility to prefix every line of output with a timestamp. This can be used to log and timestamp the output of any command line program, and is intended specifically for use with sftpc.
The command-line SFTP client, sftpc, now supports tab expansion based on wildcard patterns.
sftpc now reports a full completion timestamp for each transfer.
sftpc now waits a maximum of one second if the server does not respond to SFTP channel close. Previously, a server that did not respond to channel close would cause sftpc to wait indefinitely.
In versions 6.23 - 6.31, a command such as "put directory" would not upload the contents of "directory", but instead only create an empty directory. In addition, a command such as "lrm directory -s" would always fail when the directory being removed was not empty. Fixed.
OpenSSH servers contain a flaw where a noisy shell startup script, such as a .bashrc file, will cause garbage data to be passed to an SFTP client on the SFTP channel. Previously, this would prevent establishing an SFTP session. The client now ignores such invalid data, and looks for a particular byte signature to indicate the start of the server's first packet in the SFTP session.
The Start in last directory feature in the graphical SFTP interface should work again.
Turning off the Start option did not pause new transfers in the graphical SFTP interface when they were initiated via drag-and-drop or a clipboard action. Fixed. The transfers did start paused when using the Upload and Download buttons.
When transferring files in text mode using SFTP version 4 or higher, the ignored offset is now set to an invalid 64-bit value instead of zero. This prevents an unending transfer with servers that do not ignore the offset as required by the textual transfer mode (e.g. older versions of VShell).
Fixed an issue which could cause the SFTP client to send more channel data after sending channel close.
Fixed an issue that could cause the FTP-to-SFTP bridge to freeze while downloading.
When the FTP-to-SFTP Bridge was configured to listen on all interfaces (0.0.0.0), directory listings and file transfers would not work in passive mode. Fixed.
Double-width Chinese characters were not being properly rendered in recent SSH Client versions. This should now work properly in most cases.
Fixed problems with some Ctrl keyboard sequences: Ctrl+[, Ctrl+I, Ctrl+M, Ctrl+H, and Ctrl+J.
Fixed a scrolling problem that could occur if the last line of output was empty (e.g. when using cat).
Fixed an error that would frequently occur on Windows 10 when resizing a bvterm window in a Bitvise SSH Server terminal session. Further improved resizing on Windows 10.
If Auto close window was set to Never, and a terminal session closed successfully, the terminal window would consume 100% of a CPU core until closed. Fixed.
dan versi bitvise yang ane pake
sekilas diliat, ane kira cuma ketinggalan o.o5 dari yang terbaru, ternyata jauh jg bedanya
(12-07-2015, 11:08 AM)aviator Wrote: nyumbang changelog
thanks kk bantuannya, maaf kurang lengkap post saya, sekalian mau share info
kalau ada sedikit bugs waktu menggunakan bitvise baru 6.45 saat download torrent
muncul pesan sbb:
versi sebelumnya lancar2 saya, mungkin dalam waktu dekat ada update lagi,
atau kita harus install clean / saya langsung timpa versi sebelumnya,
12-08-2015, 01:01 AM
download langsung update dulu, walau akun ssh premiumnya belom perpanjang.
klonengane proud to be a member of ForNesia Family since Nov 2014
12-08-2015, 06:56 AM
saya recommended bitvise 6.41 kk, pakai win 7 x64,
stabil kalau pakai beberapa bitvis, 1 bitvise khusus torrent
kalau di bitvise baru sering crash bitvise nya saat torrent buka port terlalu banyak
tadi rie downgrade ke bitvise 6.41 lagi, yang baru 6.45 masih ad bug kalau bka port terlalu banyak
nanti kalau ada update lagi saya update juga
12-08-2015, 12:21 PM
wah masih ngebug toh ga
pke yg lama dl aja dh
lagian lg surem jg gratongan skr :jurhat:
12-08-2015, 06:23 PM
masih setia pake v4.60
12-17-2015, 08:06 AM
(12-07-2015, 11:08 AM)aviator Wrote: dan versi bitvise yang ane pake
sama mas 4.60 tetap masih yang paling OK dari jaman orok sampe sekarang saya juga masih pakai yg versi itu
Sombong Dikit Gak Papa.... Penting Masih Selalu Lancar Aman Jaya Sentosa Sejahtera Suka Menabung :wah:
12-27-2015, 08:36 PM
(12-17-2015, 08:06 AM)zeph Wrote:(12-07-2015, 11:08 AM)aviator Wrote: dan versi bitvise yang ane pake
yang baru cuman update support win 8++,
masih stabil versi lama
forsaken, proud to be a member of ForNesia Family since Dec 2015.
07-12-2016, 01:28 PM
v 4.60 jalan di win 10 ga ya?
gringgo34, proud to be a member of ForNesia Family since Jun 2016.
07-19-2016, 10:26 AM
udah ada ver 7.. tp menurut ane enakan ver 6..
jebe, proud to be a member of ForNesia Family since Jun 2014.
|Possibly Related Threads…|
|[Share] ForNesia PLink (Tool Pengganti Bitvise)||ForNesiaFreak||117||37,458||
06-29-2016, 06:21 AM
Last Post: gringgo34
|[Share] Bitvise Download||suryadewa||1||1,835||
04-27-2016, 10:46 AM
Last Post: shenjai47